Home / Uncategorized (page 10)

Uncategorized

Autocad_SELECTION SETS

Creating Selection Sets | Changing your options By now you have probably seen a colored rectangle appear on your screen when you left-click and the move the crosshairs around. You’ll learn all about these in this lesson. AutoCAD uses what’s called a selection set to allow you to group objects together and then …

Read More »

Autocad_ACCURATE INPUT

Now it’s time to see if you were paying attention in the first lesson. In this lesson you will complete the drawing that will test your knowledge of drawing accurately using different types of precision input. Clients expect 100% accurate drawings from YOU. It is up to the YOU to ensure …

Read More »

Autocad_MORE MODIFYING COMMANDS – OSNAPS

The previous lesson dealt with drawing commands. This lesson will introduce some common modifying commands. In AutoCAD, you may actually use modifying commands more often than drawing commands. Now that you know the basics, here’s some more commands to add to your collection. Three commands, Trim, Extend and Offset are …

Read More »

INTRODUCTION TO AUTOCAD

Welcome to the world of CAD – In this first tutorial you will be learning the very basics of CAD. This course is designed so that the commands and instructions should work on almost any version of AutoCAD, although this version is designed specifically for AutoCAD 2010 and will work …

Read More »

Autocad_INTRO TO DRAWING & MODIFYING

AutoCAD allows you to have access to a large number of commands. A general rule is that you will use 20% of the commands 80% of the time. I will start by introducing you to the most common drawing commands. When you combine these with the basic modify commands, you …

Read More »

Chamfer : Editing command in cimatron

You can edit: the Chamfer feature itself (by the Feature Guide) the chamfer value only Note: If your changes result in a geometric impossibility, or cause problems in subsequent features, you will be warned by the Conflict Solver.   Editing the Chamfer by the Feature Guide Right-click on the Chamfer name in …

Read More »

Revolve Angle and Angle Mid Plane

Revolve a closed sketch / composite curve by a given value and direction. Important: Objects created by New > Revolve will be considered independent objects. Those created by Add > Revolve will be added to the active object. (If only one object exists in the file it is automatically active unless manually deactivated.) See Activate / Deactivate and Activating …

Read More »

Toolbars tab (Customize dialog box) Mastercam

Choose Settings, Customize and click the Toolbars tab. Toolbars tab (Customize dialog box)   Use this tab to create, delete, and customize Mastercam toolbars. You can: Add or remove toolbar buttons To add function buttons to an existing toolbar, choose a category from the Category drop-down list to display its …

Read More »

Right-click menus in mastercam

Mastercam provides a number of right-click menus. For example, in the Toolpath Manager tab, right-click to access an extensive list of functions and submenus for working with machine groups, toolpath groups, toolpaths, operations, setup sheets and more. In the Toolpath parameters dialog box and tab, right-click to choose from a …

Read More »

ew

Interface elements A short description of each element of the Mastercam interface follows: Menu bar Contains menus that let you access all Mastercam features and functions. Click or hover over the menu choice to view its commands. Some of the commands have images next to them so you can quickly …

Read More »