Home / Tag Archives: siemens NX solution (page 4)

Tag Archives: siemens NX solution

Error Options siemens NX

This section contains information about error messages that may be displayed while you are using the NX Modeling application. Edit During Update (EDU) facility The Error During Update dialog (EDU) displays if a problem occurs during the update of your model. Error messages and warnings display in the EDU, and …

Read More »

Law subfunction siemens NX

The Law subfunction appears for certain commands (such as Law Extension, Face Blend, Helix, etc) when you create objects using law controlled function parameters. You can use it to describe a function in one of several ways. Here are a few examples of the ways you can use this subfunction: …

Read More »

Snip Facet Body siemens NX

Use this command to snip or divide facet bodies. You can define areas on facet bodies to snip by using regions, curves, or planes. Facet body snipped by projecting a curve Facet body snipped with two curve strings Where do I find it? Application Modeling and Shape Studio Prerequisite Essentials …

Read More »

Group Face dialog box siemens NX

Face to Group Select Face Lets you select the faces to collect into a Group Face feature. Faces do not need to be edge-connected, and can be on different bodies. Selection Intent is available when you select the faces. Face Finder Lets you select faces based on how their geometry …

Read More »

Shell Body siemens NX

Use the Shell Body command to add an adaptive shell to a solid body, by piercing one or more faces and specifying a wall thickness. The result is a shelled body that maintains its wall thickness and its relation to other partner faces when the model is changed. Where do …

Read More »

Resize Chamfer siemens NX

Use the Resize Chamfer command to change the size or type of chamfer, symmetric, asymmetric, or offset and angle. The selected faces: Must be planar or conical. Must have a constant width. Cannot be a construction face for another chamfer. Note If the faces meet all the criteria but are …

Read More »

Move Face siemens NX

Use the Move Face command to move a set of faces and automatically adjust adjacent faces. You can use linear, angular or circular transform methods to move the selected faces. Move Face is a useful design tool that facilitates easy design change during the design process. It is also useful …

Read More »

Isoparametric Trim/Divide siemens NX

This option lets you trim or divide a B-surface by a percentage parameter in either the U or V isoparametric direction. You can trim or divide a sheet body (when the parameter you specify is between 0.0% and 100.0%) or extend it (when the parameter you specify is less than …

Read More »

Extension Surface siemens NX

Use the Extension command to create an extension surface sheet at a surface edge or corner. Edge-based extension surfaces have two methods of definition, Tangential and Circular. Corner-based extension surfaces use specified U and V percentages of the original surface to determine the size of the extended surface. Where do …

Read More »

Swept siemens NX

Use the Swept command to create a solid body or a sheet by sweeping one or more sections along one, two, or three guide strings. You can: Control the shape of the swept body by aligning section strings along the guide strings. Control the orientation of sections as they sweep …

Read More »