Home / Tag Archives: siemens NX 9 document (page 4)

Tag Archives: siemens NX 9 document

Create and Reattach sketch dialog box siemens NX

Type  On Plane Lets you sketch in place, either on an existing plane or face, or on a new plane or CSYS.  On Path Lets you sketch on a path, constructing input for commands like Variational Sweep. On Plane options Sketch Plane Plane Method Inferred Lets you select a plane …

Read More »

Group a set of faces with Group Face siemens NX

On the Synchronous Modeling toolbar, click Group Face , or choose Insert→Synchronous Modeling→Group Face. Select a set of faces to group together: You can use the Face Finder options to select faces based on how their geometry compares to that of the selected face. You can use Selection Intent to …

Read More »

Shell siemens NX

Shell in Synchronous Modeling hollows out a body with an adaptive shell. An adaptive shell consists of a wall thickness value and a collection of relations between selected shell faces and their respective offset partner faces. Shell relations in an adaptive shell can maintain the wall thickness of the shell …

Read More »

Resize Blend siemens NX

Use the Resize Blend command to change the radii of blend faces regardless of their feature history. The Resize Blend command works with translated files and unparameterized solids. In this example, the red face in the body on the left is resized using Resize Blend. The dependent blue face updates …

Read More »

Move Defining Point siemens NX

You can use Move Defining Point to move the points lying on a sheet body (defining points). When you use this option, a warning message is displayed indicating that the operation will remove the parameters from the sheet body. You are asked to OK or Cancel the operation. Note When …

Read More »

Smooth Poles siemens NX

Use the Smooth Poles command to modify pole distribution by calculating the proper distribution of selected poles in relation to surrounding surfaces. You can use this command to finalize Class A production surfaces. After you create a surface that is in compliance with your specification data (such as a scanned …

Read More »

Law Extension siemens NX

Use the Law Extension command to extend an existing surface or sheet based on the laws for distance and the angle of the extension. Law Extension creates flanges or extensions when a particular direction is important or when it is necessary to reference the existing face. For example, in die …

Read More »

N-Sided Surface overview siemens NX

Use the N-Sided Surface command to create a surface enclosed by a set of end-connected curves. You can do the following: Build a surface with an unrestricted number of curves or edges that form a simple, open or closed loop, and assign continuity to outside faces. Remove holes or gaps …

Read More »

Ribbon Builder siemens NX

Use the Ribbon Builder command to build a sheet body between an input profile and an offset profile. In the following animation, a sheet body is created between the spline and its offset profile. Where do I find it? Application Modeling Toolbar Surface→Surface Drop-down→Ribbon Builder Menu Insert→Surface→Ribbon Builder

Read More »

Draft Body siemens NX

Use the Draft Body command to add and match drafts on both sides of a parting surface and to fill undercut regions with material. You can use this command when you develop models for castings and molded parts. The following example shows a double-sided taper on both sides of a …

Read More »