Home / Tag Archives: siemens NX 7 engineering (page 5)

Tag Archives: siemens NX 7 engineering

Ruled surface siemens NX

Use the Ruled command to create a body between two sections, where the ruled shape is a linear transition between the sections. A section can consist of single or multiple objects, and each object can be a curve, a solid edge, or a solid face. Input Curves and output Ruled …

Read More »

Bounded Plane siemens NX

Use the Bounded Plane command to create a planar sheet body enclosed by a set of end-connected planar curves. The curves must be coplanar and form a closed shape. To create a bounded plane, you must establish its boundary, and if necessary, define any internal boundaries (holes). You can define …

Read More »

Bridge siemens NX

Use the Bridge command to create a sheet body to connect two faces. You can do the following: Specify either Tangent or Curvature Continuity between the bridge and the defining surfaces. Specify the Tangent Magnitude for each edge. Select the Flow Direction for the surface. Limit the surface edges to …

Read More »

Wrap Geometry siemens NX

Use the Wrap Geometry command to simplify a detailed model by computing a solid envelope to surround it, effectively “shrink wrapping” it with a convex polyhedron of planar faces (a Wrap Geometry feature). The original model can consist of any number of solid or sheet bodies, curves and points. When …

Read More »

Offset Surface siemens NX

Use the Offset Surface command to create an offset of one or more existing faces. The result is a new body (or bodies) with an offset relation to the chosen faces. The software creates a true offset surface by offsetting points along surface normals of the selected face. The specified …

Read More »

Multi Patch Alignment siemens NX

Use Multi Patch Alignment to align multiple facet bodies to one another without having to define reference points, as you do with the Point Set to Point Set Alignment command. Multi Patch Alignment is also useful for fine-tuning a rough alignment from using the Point Set command. You can select …

Read More »

Trimmed Sheet siemens NX

Use the Trimmed Sheet command to trim sheet bodies to intersecting faces and datums, and projected curves and edges. The following example shows a sewn sheet body trimmed by two intersecting surfaces and one set of projected curves. 1¬†Sewn Sheet body to be trimmed. 2¬†Intersecting surfaces selected as boundary objects. …

Read More »

Join Face siemens NX

Use the Join Face command to join faces on a body. You can choose from the following two methods: On Same Surface Remove redundant faces, edges, and vertices from selected bodies. If you subdivide a face and subsequently discover that you no longer need the subdivision, you can use this …

Read More »

Emboss Sheet siemens NX

Use the Emboss Sheet command to modify a sheet body by adding faces of a solid body, as if the solid body was pressed into the sheet body. Sheet metal models are embossed to: Increase a metal panels stiffness and rigidity. Increase the surface area for heat transfer or acoustic …

Read More »

Instance Feature siemens NX

Use the Instance Feature command to: Create patterns such as bolt hole circles. Create a number of similar features such as ribs. Edit all instanced features in one step. You can define three Instance Feature types: Rectangular Array Circular Array Pattern Face You can add edge blends, chamfers, and threads …

Read More »