Home / Tag Archives: rapidform 2012 command

Tag Archives: rapidform 2012 command

Healing Wizard option in Rapidform XOR

Healing Wizard command provides functions to clean defective poly-vertices or poly-faces. It is not executed in the order of the options on the dialog tree. How to use Healing Wizard command Click button on the toolbar, or click Tools > Mesh Tools > Healing Wizard. The application detects erroneous poly-faces …

Read More »

Align option in Rapidform XOR

Align command roughly aligns one shell with another using common geometric features and performs fine alignment. How to use Align command Click Tools > Scan Tools > Align. Click Moving under the Local Based On Auto Guess options and select all mesh data. Click the (Apply) button. The application automatically …

Read More »

3D Sketch option in Rapidform XOR

3D Sketch command allows you command allows you to create 3D geometries; Spline, Section, Projection and so on. You can edit created 3D geometries using Trim, Smooth, Split and so on. Join You can join disconnected curves or create intersection points. l Curve Ends – Less than given distance’s gap …

Read More »

Duplicate Body option in Rapidform XOR

Duplicate Bodycommand allows you to copy selected body. How to use Duplicate Body command Click button on the toolbar, or click Insert >Modeling Feature > Duplicate Body. Select a body to duplicate. Click OK button. You can see the new entity named Duplicated Body 1 in the Feature Tree. Options …

Read More »

Helix option in Rapidform XOR

Helixcommand allows you to create a helical curve. How to use Curve Helix command Click button on the toolbar, or clickInsert >Modeling Feature > Helix. Select a Vector as Axis. Select a Ref. Point as Starts (start position). 4. Set the Angle, Height, Radius or Pitch in the Profile View. …

Read More »

Draft option in Rapidform XOR

Draftcommand allows you to taper selected faces in the model. How to use Draft command Click button on the toolbar, or clickInsert >Modeling Feature > Draft. Select bottom face as Neutral Plane. Select side faces as Draft Faces. Set Angle to 2 degree and click Preview. If you want to …

Read More »

Untrim option in Rapidform XOR

You can cancel the trimed area on a surface. How to use Untrim command Click button on the toolbar, or click Insert > Surface > Untrim. Select inside boundary for Select Loops. Click OK. Options in Detail Entities– You can select loops edges or faces on an untrimed surface.

Read More »

Revolve option in Rapidform XOR

Revolve add or remove material by revolving one or more profiles around a centerline. How to use Revolve command Create sketch as the below image. Click button on the toolbar, or click Insert > Surface > Revolve. Select Base Sketch.   Click OK.

Read More »

Surface option in Rapidform XOR

Insert > Surface allows you to work with surfaces in the application. It provides functions like Surface Primitives, Mesh Fit, Boundary Fit, Auto Surfacing, Extrude, Revolve, Sweep, Loft, Offset, Fill Face, Extend, Trim, Untrim, Trim & Merge, Sew, Reverse Normal.

Read More »

Loft option in Rapidform XOR

Loft creates a feature by making transitions between profiles. How to use Loft command Click button on the toolbar, or clickInsert > Solid > Loft. Select the Profiles to loft. Click OK. Profiles– Determines the profiles used to create a loft. Select SketchEdge, 2D Sketch, 2D Sketch Chain, 3D Sketch, …

Read More »