Home / Tag Archives: rapidform 2010 interface

Tag Archives: rapidform 2010 interface

Retriangulate option in Rapidform XOR

Retriangulate command re-triangulates the poly-faces of a selected region after deleting that region to improve the quality of each poly-face. A triangular poly-face of good quality means its poly-face shape is close to an equilateral triangle. How to use Retriangulate command Click button on the toolbar, or click Tools > …

Read More »

Konica Minolta VIVID option in Rapidform XOR

Options in Detail 1. General l Scan Name – You can input the name of the scan shot and its suffix. Auto Align – If checked, captured scan shots are automatically aligned. You can select Rotary Axis, when you use a rotary table device, or Gemetry that performs auto alignment …

Read More »

Sketch option in Rapidform XOR

  How to use Sketch command Click button in the Tool Palette, or click Insert > Sketch. The following dialog tree appears. Select Plane or Face. Now you are in the Sketch mode so you can create Line, Rectangle and so on. Edit 2D sketch using trim, fillet and so …

Read More »

Split Face option in Rapidform XOR

Split Facecommand splits target entity with the Projection, Silhouette or Intersecion method. After Split Face, the target entity has several faces but it is still a single entity. This command is useful when you want to add edges on a solid or surface body. How to use Split command Click …

Read More »

Curve Pattern option in Rapidform XOR

Curve Patterncommand allows you to create patterns based on a curve. How to use Curve Pattern command Click button on the toolbar, or click Insert >Modeling Feature > Curve Pattern. Select a body for Object To Pattern and curve for Driven Curve. Set instance to 6 and check Equal Spacing. …

Read More »

Fillet option in Rapidform XOR

Filletcommand allows you to create round shape edge of solid. How to use Fillet command Click button on the toolbar, or click Insert >Modeling Feature > Fillet. Select Various Fillet.Select two edges like below: Transition Method – You can decide transition on the position of start and end. Smooth Transition …

Read More »

Extend option in Rapidform XOR

Using this command, You can extend a surface by selecting an edge, multiple edges, or a face. How to use Extend command Click button on the toolbar, or click Insert > Surface > Extend. Select the edges. Enter the Distance for extension. Click OK.   Edges/Faces – Select edges or …

Read More »

Boundary Fit option in Rapidform XOR

Using this command, you can create the surface by fitting the boundary in mesh data. How to use Boundary Fit command Click Insert > Surface > Boundary Fitor click on the toolbar. Select the curve to create the boundary fit. Click OK. Hide 3D Mesh Sketch.   Mesh Curves – …

Read More »

Cut option in Rapidform XOR

Using this command, you can cut a solid body with other entities. When there are more than one body parts, you can select the body to remain. How to use Cut command Click button on the toolbar, or clickInsert > Solid > Cut. Select the Tool Entity (Solid Body)and Target …

Read More »