Home / Tag Archives: inventor document (page 6)

Tag Archives: inventor document

Sketch points and center points

You can delete center points and sketch points. If the point is used in a feature, and you created features whose geometry depends on the feature, the dependent features are either modified or deleted. Points in 2D and 3D sketches In 2D sketches Place points on a sketch plane. Sketch …

Read More »

Create path for sweep feature autodesk inventor

Select model edges or sketch curves to represent segments in a path. NOTE:For a sweep feature, ensure that the path intersects the sketch plane of the profile . If the segments are not joined at their endpoints, on the 3D Model tab  Sketch panel, click Create 2D Sketch to activate the sketch. Then click Sketch tab  Constrain panel  Coincident Constraint, and join segments at …

Read More »

Sketch path for sweep feature autodesk inventor

When you create a sweep feature, you first sketch a path that intersects the sketch plane of the profile. To position path sketches and profiles , either create two work planes that intersect, or create an intermediate toolbody, such as a block

Read More »

Draw three-point arc using dynamic input

In Sketch mode, on the ribbon Sketch tab  Create Panel , click Arc Three Point . In the graphics window, pick a starting point for the arc. When Pointer Input is turned on, the X and Y values for the arc start point display. In the highlighted value input box, enter a length (distance) value …

Read More »

Draw center point arc using dynamic input

In Sketch mode, on the ribbon Sketch tab  Create Panel, click Arc Center Point. In the graphics window, pick a center point for the arc. When Pointer Input is turned on, the X and Y values for the arc center point display. The first value input box highlights. Enter a value for the …

Read More »

Paste Options dialog box autodesk iventor

Pastes copied AutoCAD data from the clipboard to an Autodesk Inventor 2D sketch, and specifies preferences. Access On the ribbon, click 3D Model tab  Sketch panel  Create 2D Sketch . Right-click in the sketch, and select Paste Options. Available only if AutoCAD data is on the clipboard. Import File Units Specifies the units for the copied …

Read More »

Make sketch symmetrical about bisector autodesk inventor

Locate the midplane by sketching a line from the midpoint of one side to the midpoint of the opposite side. To begin, use commands on the Sketch tab to create sketch geometry. In an active sketch: Click Sketch tab  Create Panel  Line , then right-click and click Midpoint. Click a line to locate the midpoint and …

Read More »

Set sketch grid autodesk inventor

Set spacing and number of grid lines On the Tools tab  Options panel , click Document Settings.. On the Sketch tab, in Snap Spacing, enter the snap intervals. You can set different values for X and Y axes. In Grid Display, enter the number of snaps per minor line. In Major Every, enter the number of minor …

Read More »

Realign sketch coordinate system

Alignment is by a vertex or a feature edge . Arrows indicate the directions of the X and Y axes. Create a sketch on a feature face or work plane. On the ribbon Sketch tab  Constrain panel , click Edit Coordinate System .Rotate coordinate system On the axis icon (near the center of the sketch), click the red arrow …

Read More »

Sketch environment

Consists of a sketch plane (where the sketch is located) and sketch commands. You create edit, constrain, and dimension sketches only when the sketch environment is active. To activate the sketch environment, on the ribbon, click the Sketch tab.  Show Me about the difference between sketched and placed features With …

Read More »