Home / Tag Archives: inventor document (page 5)

Tag Archives: inventor document

Sketch block autodesk inventor

The designs of many assemblies repeat rigid shapes. Sketch blocks can capture such shapes as a fixed set, and you can place instances of the set. For example, say that you have a 2D sketch that represents a hydraulic cylinder, and there are four hydraulic cylinders in your assembly. If …

Read More »

Draw linear slot autodesk inventor

Click in the graphic window to place the center point of the slot. Move the cursor, and click to specify the center of a slot arc.If appropriate, enter the distance or angle in the edit field. Move the cursor, and click to specify the width of the slot. Alternatively: Enter …

Read More »

Fillet sketched lines

Click the lines to fillet. In the Sketch Fillet Radius dialog box, enter the fillet radius to complete the fillet. Click Equal to create fillets with equal radii.To preview the fillet, move the cursor over an endpoint shared by two lines. (Optional) Enter a different radius. Radius remains in effect …

Read More »

Create line segment and arc

In the graphics window, click to set the start point of a line. Click again to set a second point, ending the line segment. Continue clicking to create continuous segments, or double-click to end a segment.Click Undo to remove line segments and arcs one at a time, in reverse order. …

Read More »

Interpolation Spline reference

Creates and sets controls for interpolation splines. Access Ribbon: Sketch tab  Create Panel  Interpolation Spline  Resize Resizes the spline when you drag an endpoint. The endpoint on the opposite end of the spline remains in a fixed position. Move Moves the spline when you click it, and then drag. Reshape Reshapes the spline …

Read More »

Create and adjust control vertex spline

Reposition the spline by adding dimensions and constraints to the control frame, or between the control frame and other geometry. Use the context menu options to: Add a vertex. Close the spline. Convert to an interpolation spline. Change the control frame polygon visibility.

Read More »

Create and adjust interpolation spline

To reverse a handle edit, select the spline, right-click, and then click Reset Handle. Uses the handle closest to the cursor location, unless a fit point or handle is selected. Bases the reset on the current spline shape. Does not always change the spline handle back to the original solve …

Read More »

Delete or move 3D sketch point

Delete point In the browser, double-click the Sketch icon to activate the sketch. Click a center point, or sketch point to delete. Press Delete, or right-click and select Delete. Move 3D sketch point Right-click a point, and select 3D Move/Rotate. To reposition the point in space, enter X, Y, and …

Read More »