Home / Tag Archives: cimatron program menu

Tag Archives: cimatron program menu

Stock, Shank & Holder Tracking Parameters

Within the Stock, Shank & Holder Tracking parameters, you can define whether remaining stock should be considered and also define which part of the tool (the Cutter, Shank and/or Holder) is checked against the part surfaces, and which part is checked against the stock surfaces. Remaining stock is used to control the approach and …

Read More »

Holder Gouge Checking: Cutter Sequence

Cutter Sequence is one of the Holder Options under Holder Gouge Check: With this option you can open a table in which a sequence of milling cutters can be defined. The cutters must be chosen from the list of defined cutters. Feed and Spin may be defined for each cutter, and all cutters on the sequence list may be …

Read More »

Machine Between Layers: Parameters

The following parameters appear in the Machine Between Layers Table (the appearance of a parameter in the table is dependent upon the procedure you have selected): Between Layers Strategy Layers Order Side Step Vertical Step Type Volume Milling Strategy

Read More »

Entry End Points: Parameters

The following parameters appear in the Entry & End Points Table (the appearance of a parameter in the table is dependent upon the procedure you have selected): Approach / Retract Extension Connect Layers via Clear for Distance Define Entry Points Delta Z DZ_Feed Start DZ Length End Check End Points Entry Beyond …

Read More »

Clearance & UCS: Parameters

The following parameters appear in the Clearance Table (the appearance of a parameter in the table is dependent upon the procedure you have selected): Clearance Distance Clearance Plane Clearance Type Connect Through Internal Clearance Local Clear Height Minimum Clear Length Pivot Axis UCS Name   Clearance Distance The distance of the clearance …

Read More »