Home / Tag Archives: cimatron E learning

Tag Archives: cimatron E learning

Executing a Toolpath or Procedure

Toolpaths and procedures that have been satisfactorily defined may be executed. Invoking Execution Execution Modes Progress Bar Viewing Cutter Motions Monitoring Tools Status Flags after Execution Interrupting Procedure Execution Terminating All Executions   Invoking Execution The following methods can be used to invoke toolpath/procedure execution; execute a procedure while still …

Read More »

Unbend Solid : Editing

Editing the Bend Feature Guide Right-click on the Unbend Solid name in the Feature Tree. In the popup submenu that appears, select Edit Feature. The Feature Guide will appear, automatically open to Required Step 2. You now return to the same situation where you defined the Rebend parameters. Press OK  or Apply  in the Feature Guide to complete the function.

Read More »

Taper : Editing

You can edit: the Taper feature itself (by the Feature Guide) the Taper angle value only Note: If your changes result in a geometric impossibility, or cause problems in subsequent features, you will be warned by the Conflict Solver.   Editing the Taper by the Feature Guide Right-click on the Taper name …

Read More »

Non Uniform Thicknesses

Optional Step 1 If you want to create a shell with varying wall thickness, click the Optional Step button . Pick the face(s) whose wall thickness you want to specify. In the example below, thicknesses for two walls were specified. Note: The Non-uniform shell is available only for closed solid objects (it is not available …

Read More »

Scale command in cimatron

Increase/decrease the volume of an object(s) or the size of a face or sketch. This function is also accessed from the Parting Guide under the name Shrink. This allows you to produce mold shrinkage You can also apply shrinkage parameters to one or more objects, open or closed. Note: When creating a Non-Uniform Scale, the Automatic Preview …

Read More »

Round-Face > Face-Face

Create round faces or surfaces between two groups of faces. Note: This function can give the same results as the Round function when used on adjacent faces, and can also create rounds between non-adjacent faces. Round can only be used on existing edges. General Interaction The following is the Feature Guide for Face-Face.

Read More »

Options and Results

Remove faces by extending adjacent faces to fill the gap. This function can be used to: Remove round corners, extend the adjacent faces and create sharp corners instead. Remove holes. Heal faces that were previously split. Extend adjacent faces. Automatically select all adjacent smooth faces.   Required Step 1 Pick the …

Read More »

Remove > Revolve : Editing

You can edit: the Revolve Remove feature itself (by the Feature Guide) the revolve sketch / contour the numerical parameter values only (theta, sketch dimensions, etc.) Note: If your changes result in a geometric impossibility, or cause problems in subsequent features, you will be warned by the Conflict Solver.   Editing the …

Read More »

Extrude Delta/Reference

Remove material by extruding on one or both sides, a closed sketch / composite curve, 3D face or face with tolerant edges, by a given value and direction. Important: When using this function, material will be removed only from the current active object. (If only one object exists in the file it …

Read More »

New > Loft : Editing

Note: If your changes result in a geometric impossibility, or cause problems in subsequent features, you will be warned by the Conflict Solver. Editing the Loft by the Feature Guide Right-click on the Loft name in the Feature Tree, or select one Loft face and then right-click. In the popup submenu that appears, select Edit …

Read More »