Siemens NX

    LINK DOWNLOAD (PDF) http://www.mediafire.com/download/jy7bl1b2slz7o5g/MILL-MANUFACTURING+PROCESS+NX.pdf  

To generate NC code of turning operation for Lab 6, you need to go through the following steps. Note that these steps are also a summary for the subsequent detailed tutorial. 1. Setup the manufacturing task a. Open a solid model you have built b. Create a new manufacturing task …

This self-guiding tutorial provides a step-by-step approach for users to learn NX9.0. It is intended for those with no previous experience with NX. However, users of previous versions of NX may also find this tutorial useful for them to learn the new user interfaces and functions. The user will be …

Next we will begin construction of the model geometry. Insert > Design Feature > Extrude (or find the “Extrude” icon in the icon menu) The EXTRUDE dialogue will open and Section – Select Curve option will be highlighted. This is prompting the user to select the location and orientation of …

This self-guiding tutorial provides a step-by-step approach for users to learn NX7. It is intended for those with no previous experience with NX. However, users of previous versions of NX may also find this tutorial useful for them to learn the new user interfaces and functions. The user will be guided from …

This document is meant as an accompaniment to the tutorial “NX5 for Engineering Design” by Mign C. Leu and Akul Joshi. It is not meant as a standalone reference. Important and significant version changes between Unigraphics NX release 5.0 and 6.0 that may cause frustration to users attempting to complete …

The NC controller you use determines which items appear in the channel window. You can customize this dialog in the Machine Tool Driver to reflect your needs. Due to this, each controller can have a different look and different items in the simulation dialog. The following list summarizes the functions …

Follow the following steps to synchronize your tool path: Create a part file. Enter the Manufacturing application. Replace the machine with appropriate one from the machine tool library. Load your part as a component onto the machine. Create tools, geometry, and operations as you would when programming a single turret …

Remember that when you use Pinch Turning the cutting moves are synchronized since they are the same and have a controlled feedrate. Make sure that you have the non cutting moves synchronized too. Since both turrets might have different acceleration/deceleration parameters it’s not simply syncing the start of the first …

The Advanced Programming module assists you in programming machines that can simultaneously execute multiple channel NC programs. It includes a method for synchronizing the channel programs by adding synchronization and wait codes to the tool path, as well as simulation and time calculation features to verify and optimize the NC …