Editing the Pad in catia

You may like to make the pad thicker. This task shows you how to edit the pad and how to color the part. Double-click Pad.1. You can do it in the specification tree if you wish. In the Pad Definition dialog box that appears, enter 90 mm as the new …

Read More »

Filleting an Edge in catia

This task shows you how to use one of the fillet commands designed to fillet edges. Click Edge Fillet . The Edge Fillet Definition dialog box appears. It contains default values. Select the edge to be filleted, that is, to be rounded. The icon now available after the Objects to …

Read More »

Drafting a Face in catia

This task shows you how to draft a face. Click Draft Angle . The Draft Definition dialog box appears. The application displays the default pulling direction on the part. Select the face as shown by the arrow as the face to be drafted. The application detects all the faces to …

Read More »

Creating a Pad in catia

This task shows you how to create a pad, that is extrude a profile sketched in the Sketcher workbench. For more about this workbench, refer to Sketcher User’s Guide Version 5. Open the GettingStarted.CATPart document to open the required profile. Your profile belongs to Sketch.1 and was created on plane …

Read More »

Springback by Measured Machines in Visi Progress

Overview Description: This utility allows to recalculate the compensated part in order to obtain the nominal part after the stamping process, avoiding the springback effect. This function, starting from the nominal part (surface), and importing the measured points by measured machine, calculates the opposite points, giving the possibility to add …

Read More »

Ribs feature in Visi Progress

Overview Description: There are 2 kinds of ribs: by two points, by path curve. Basically the feature is the result of a profile along a curve. The shape of profile is drawn by feature properties. Parameters Description: If you require further information on any parameter in the image below, point …

Read More »

Bosses feature in Visi Progress

Overview Description: There are 3 kinds of bosses: by one point, by two points, by path curve. The boss can be done closed or opened. Basically the feature is the result of a profile along a curve, or a profile revolution. The shape of profile is drawn by feature properties. …

Read More »

Ribs & Bosses in Visi Progress

Overview Description: These features are used to strengthen a sheet metal part. The command works only with skins (not solids). At the beginning, the system asks a body (skin) selection. TAB Description: The Ribs & Bosses command is divided in 2 kinds of features: Bosses & Ribs Boss Rib Note: …

Read More »

Cylndrical Drawing in Visi Progress

Overview Description: This application allows to calculate all the steps relative to the Cylindrical Drawing starting from a revolution profile. Selecting this command from Progress menu, the system needs to select the reference profile, then the revolution axis and the relative point and the thickness side: 2D profile selection, and …

Read More »

Strip study in Visi Progress

Overview Description: After to have studied a part using the Part Study management or one of our Flange off-line functionalities (Flange Unfolding, Linear Flange, Blank Unfolding, VISI Blank), we can define and create a Real Strip. First of all, to create the 3D Strip, is absolutely necessary have the Blank …

Read More »