The Iso Clipping PropertyManager allows you to view surfaces of a specified value of the plotted result. You can create up to six surfaces simultaneously.
Iso 1 and Iso 2
| Isovalue | Sets the value of iso surface to be plotted. Reverse clipping direction |
Iso 3
This section appears after you select Iso 2. Use Iso 2 and Iso 3 to create additional section views in the model.
Options
| Plot on iso surface only | If checked, the program displays surfaces with the value specified in the Isovalue box. If not checked, the program displays surfaces with values equal to or larger than the value specified in the Isovalue box. | |
| Show contour on the uncut portion of the model | If checked, the program displays the result contours on the uncut portion of the model. If not checked, the program displays uncut portion of the model in the shaded view mode. | |
| Reset | Resets the selections to the default values. | |
| Clipping on/off | Turns the clipping of the active plot on/off. |
Related posts:
Design Insight PropertyManager solidworks simulation
Use Inertial Relief solidworks simulation
Default Options – Plot – Color Chart solidworks simulation
Section PropertyManager solidworks simulation
Performing Drop Test Analysis solidworks simulation
Performing Buckling Analysis solidworks simulation
Printing Result Plots solidworks simulation
System Options – General solidworks simulation