Home / Cimatron Help / Extrude command in cimatron

Extrude command in cimatron

Extrude a closed sketch / composite curve on both sides, by the same value and direction.

Important: Extrusions created by New > Extrude will be considered independent objects. Those created by Add > Extrude will be added to the active object. (If only one object exists in the file it is automatically active unless manually deactivated.) See Activate / Deactivate and Activating Objects

bk6

Required Step 1

Pick the entity to be extruded (pick a closed 2D composite curvesketch or face).

Pick a closed 2D composite curvesketch or face.

Notes:

  • If you enter Extrude immediately after creating a closed 2D composite curve or sketch, the entity is automatically included in Step 1.
  • If you select a sketch that contains more than one closed curve sequence, all closed curve sequences will be extruded. In order for a sketch to be selected, however, it must contain only closed curve sequences.
  • bk7

Required Step 2

Press the Delta = field to enter the extrusion value. The value you enter is the total extrusion depth – the contour is extruded by half the value in each direction. The default direction is normal to the 2D contour or sketch plane; you can click on the arrow origin to set another direction. (In this case, flipping the arrow direction has no effect.)

Use the Invert Active Object option as required.

Press exit when finished. Or, if this is the final result, press OK  or Apply  in the Feature Guide to complete the function.

bk8bk9

Leave a Reply

Your email address will not be published. Required fields are marked *