Home / Cimatron Help / Cutting One Face by Multiple Objects

Cutting One Face by Multiple Objects

Note: If you want to cut one or more faces that are part of open or closed solid objects, you can use the Faces > Trim function. TheCut function treats each individual face as an open object, therefore the interaction is the same as Cutting One Object by Multiple Objects.

The part shown below consists of two individual solids and one face. The face is a blend face between two splines.cmt13

No material is “removed” from the face, despite the presence of the solids. This can be demonstrated by moving the solids.cmt14

 

Required Step 1

Pick the face to be cut. Press exit when the face is selected.cmt15

Required Step 2

Set the Cut parameters as required and pick the cutting entities, in this case the blue and yellow objects. Press exit when the objects are selected.

cmt16

Press OK  or Apply  in the Feature Guide to complete the function.cmt17

If the blue and yellow objects are moved, you can see that the face is cut.

When completed, the Cut appears in the Feature Tree as follows:cmt18

Leave a Reply

Your email address will not be published. Required fields are marked *