Home / Catia Help / Creating Drafts with Parting Elements in catia

Creating Drafts with Parting Elements in catia

This task shows how to draft a part by using a parting element.
Prior to performing this task, see Basic Draft, then open the Draft1.CATPart document.
  1. Select the face to be drafted.
  2. Click Draft Angle v1.
    The Draft Definition dialog box displays and an arrow appears on the part, indicating the default pulling direction. The selected face is red and highlighted. The application detects that other faces are to be drafted and displays them in light red.

    m1

The icon now available after the Faces to draft field lets you edit the list of the faces to be drafted. For more information about that capability, refer to Editing a List of Elements.
  1. Click the Selection field and select plane xy to define the neutral element.
    The application displays the neutral curve in pink.

    m2

  1. Enter 13 degrees as the new angle value.
    For more information, see Angle Values.
  2. Now click More to display the whole dialog box and access the Parting Element capability.

    m3

Parting Element

  1. To define the parting element, you can check:
    • Parting = Neutral to reuse the plane you selected as the neutral element,

    or

    • Define parting element and then explicitly select a plane or a planar face as the parting element.

    When using a parting element and a limiting element, both selected elements must intersect to produce a draft feature.

  2. Select Parting =Neutral. You then can also select Draft both sides as illustrated at the end of the scenario.
    To get information about the Draft form option, see Angle Values.
  1. Click Preview: the draft is displayed in blue.

    m4

  2. Click OK.
    Material has been removed, the face is drafted.

    m5

  • Contextual commands creating the parting elements you need are available from the Selection field:

    • Create Plane: see Creating Planes

    • XY Plane: the XY plane of the current coordinate system origin (0,0,0) becomes the parting element.

    • YZ Plane: the YZ plane of the current coordinate system origin (0,0,0) becomes the parting element.

    • ZX Plane: the ZX plane of the current coordinate system origin (0,0,0) becomes the parting element.

    If you create any of these elements, the application then displays the corresponding icon next to the Selection field. Clicking this icon enables you to edit the element.

  1. In the specification tree, double-click the draft to edit it.
  2. Select Draft both sides to draft the pad in both opposite directions from the parting element.
  3. Click OK to confirm.
    The pad now looks like this:

    m6

Angle Values

  • You can draft faces using a negative value.
  • If the chosen angle value exceeds the angle value of the faces adjacent to the face to be drafted, an error message is issued. To perform the draft, you then need to activate the Square option available from the Draft form drop-down list. The use of the Square option does not guarantee that parts will be easily removed from their molds.
    Here is an example of a drafted face obtained using the Square option:

    m7
    m8 m9

Methodology

If you perform a difficult drafting, for example if you obtain twisted faces, use the Deactivate and Extract Geometry commands to solve your difficulties.

Draft Form

Draft Form provides two types of draft computation modes. Square and Cone. Both computation modes provide the same geometrical result if the neutral line is included in a plane normal to the draft plane. For all other geometrical contexts, you will have to decide to use one of these options. The choice of the option to set will be done empirically.

Square: mathematically speaking, the result obtained is never exact but most of the time lets you create a satisfactory draft feature.
We recommend not to use Square when the surface you want to draft is very long.

Cone: the application uses envelops of cones defined along a given curve to generate draft features.
When the use of Square does not guarantee that parts will be easily removed from their molds, Cone is the alternative option to be set. Mathematically speaking, the result obtained is always exact but sometimes produces twisted surfaces.

The Draft both sides check box is applicable only to the faces which are cut by the parting element. The selected faces which are neither present on the pulling direction side nor cut by the parting element are not considered for drafting.

Leave a Reply

Your email address will not be published. Required fields are marked *