Creating a Pad in catia
|This task shows you how to create a pad, that is extrude a profile sketched in the Sketcher workbench. For more about this workbench, refer to Sketcher User’s Guide Version 5.
||Open the GettingStarted.CATPart document to open the required profile.
||Your profile belongs to Sketch.1 and was created on plane xy. It looks like this:
- Select the profile if not already selected and click Pad .
The Pad Definition dialog box appears. Default options allow you to create a basic pad.
- As you prefer to create a larger pad, enter 60 mm in the Length field.
The application previews the pad to be created.
- Click OK.
The pad is created. The extrusion is performed in a direction which is normal to the sketch plane. The application displays this creation in the specification tree:
The application lets you control the display of some of the part components. To know more about the components you can display or hide, refer to the General section that describes how to customize the Tree and Geometry Views.
||For more about pads, refer to Creating Pads, Creating ‘Up to Next’ Pads, Creating ‘Up to Last’ Pads, Creating ‘Up to Plane’ Pads, Creating ‘Up to Surface’ Pads, and Creating Pads not Normal to Sketch Planes.
Incoming search terms:
- creating a pad in catia v5
Tags catia v5 command catia v5 document catia v5 help catia v5 interface Catia v5 tutorial how to catia v5