Home / More CAD-CAM / GibbsCam / Contouring gibbscam

Contouring gibbscam

In this sample part we start with a part that has already had plunge roughing processes applied to it. The results were saved as a facet body and that is used as our stock. This part demonstrates how to use the Contour Plunge Rough process. There is geometry that defines the contour we wish to cut. The point that designates the starting position for the contour (designated by the green arrow in the image below) and the floor face are selected. The process will cut on the right side of the geometry and will be offset by 0.3mm.

by4 by5

Leave a Reply

Your email address will not be published. Required fields are marked *