Home / Cimatron Help (page 8)

Cimatron Help

NC Report: Standard

The NC Report is a file that provides various information about a set of selected procedures. This information includes details about the project and provider, as well as toolpaths, procedures, and parameters. The Standard report type is a fully customizable, easy to manage, report. A number of output formats are available and, depending on …

Read More »

NC Report

The NC Report is a file that provides various information about a set of selected procedures. This information includes details about the project and provider, as well as toolpaths, procedures (includingmulti-cutter information), and parameters. Note: NC Reports can be initiated either from within the NC application or from within the GPP2 Post Processor. The difference between …

Read More »

Scale – Uniform Scale: Options and Results

Increase/decrease the volume of an object(s) or the size of a face or sketch. Note: When creating a Non-Uniform Scale, the Automatic Preview operation may be time-consuming. A checkbox in the Preferencesenables you enable/disable the Automatic Preview option in the Feature Guide when executing the Scale function. Uniform Scale To demonstrate how to apply uniform shrinkage, the following …

Read More »

Stretch : Editing

Editing the Stretch Feature Guide Right-click on the Stretch name in the Feature Tree. In the popup submenu that appears, select Edit Feature. The Feature Guide will appear, automatically open to Required Step 1. You now return to the same situation in which you picked the required faces. Press OK  or Apply  in the Feature Guide to complete the function

Read More »

Stretch : Options and Results

This function can be used to: Stretch (or shrink) objects along a vector relative to the reference plane. Stretch (or shrink) entire bodies or partial body regions. To demonstrate the results of the Stretch function, the following part will be used: Required Step 1 Select the object or objects that you want …

Read More »

Stretch command in cimatron

Stretch or shrink an object (as well as, objects and wire bodies) along a vector in relative to a reference plane. This tool enables stretching and compressing any type of object or objects (such as, solid, skin, curve, composite and so on) under specific conditions along a predefined vector.   …

Read More »

Unbend Solid : Editing

Editing the Bend Feature Guide Right-click on the Unbend Solid name in the Feature Tree. In the popup submenu that appears, select Edit Feature. The Feature Guide will appear, automatically open to Required Step 2. You now return to the same situation where you defined the Rebend parameters. Press OK  or Apply  in the Feature Guide to complete the function.

Read More »

Unbend Solid : Options and Results

Deform closed solid objects. This function is very useful in unbending Sheet Metal models.   Required Step 1 Pick a reference (fixed) face (either planar or closed cylindrical) or press the curve filter to pick a straight edge. Notes: The cylindrical face must be closed (for example a pipe). The planar face or straight edge must …

Read More »

Unbend Solid

Deform closed solid objects. This function is very useful in unbending Sheet Metal models.   General Interaction The following is the Feature Guide for Unbend Solid. Incoming search terms:unbend

Read More »

Bend : Editing

Editing the Bend Feature Guide Right-click on the Bend name in the Feature Tree. In the popup submenu that appears, select Edit Feature. The Feature Guide will appear, automatically open to Required Step 2. You now return to the same situation in which you picked the required faces. Press OK  or Apply  in the Feature Guide to complete the function.

Read More »