Home / Cimatron Help (page 18)

Cimatron Help

Defining a Draft Angle

Optional Step 1 By default, when you extrude a contour for dividing the object, there is no draft angle. In other words, the extrusion is uniform. If you want to define a draft angle, click on the Draft angle = field and enter a value. Note that if the angle is too …

Read More »

Dividing Objects by a Contour – To Reference

Divide object(s) by extruding a closed sketch / composite curve on one side by a given direction, to a chosen face or plane. Required Step 1 Select one or more objects (open or closed) to be divided. In this case, the yellow, blue and magenta objects are selected. Press exit when all objects …

Read More »

Dividing Objects by a Contour – Delta Mid Plane

Divide object(s) by extruding a closed sketch / composite curve on one or both sides, by the same value and direction. Required Step 1 Select one or more objects (open or closed) to be divided. In this case, the yellow, magenta, and blue objects are selected. Press exitwhen all objects are …

Read More »

Dividing Objects by a Contour – Delta

Divide object(s) by extruding a closed sketch / composite curve on one or both sides, by a given value and direction. Required Step 1 Select one or more objects (open or closed) to be divided. In this case, the pink and blue objects are selected. Press exit when all objects are selected. …

Read More »

By Contour

Divide one or more open or closed objects (also faces) by using a contour as a dividing tool. Notes: If you want to divide an object or face using a face, plane, or object as the dividing tool, use the function Divide > By Object. To divide faces of open or closed objects, …

Read More »

Editing command in cimatron

Editing the Divide by the Feature Guide Right-click on the Divide by Object name in the Feature Tree, or select one Divided face or edge and then right-click. Example: In the popup submenu that appears, select Edit Feature. The Feature Guide will appear, automatically open to Required Step 2. You now return to the same situation in which you created the …

Read More »

Parameters command in cimatron

The following toggle options are displayed during a Divide > By Object operation: An additional toggle option, As Plane/As Object, is displayed if the dividing entity is one face. The Do Not Separate Objects and Remove Cutting Object toggle options are explained using the following objects. In the example below, the red object is to be divided by …

Read More »

Dividing One Object by Faces of Objects

Notes: If you are dividing with faces, you can only select one object to divide. The dividing faces can also be individual faces (not attached to open or closed objects). See Dividing an Object by Individual Faces. When dividing by more than one face, all selected faces must be continuous. Required Step 1 Pick one …

Read More »

Divide One Object by One Face

Notes: If you are dividing with faces, you can only select one object to divide. The dividing faces can also be part of open or closed objects. See Cutting an Object by Faces of Objects. When dividing by more than one face, all selected faces must be part of a continuous object. Individual faces can …

Read More »

Dividing One Object by Multi Faces

Notes: If you are dividing with faces, you can only select one object to divide. The dividing faces can also be part of open or closed objects. See Dividing an Object by Faces of Objects. When dividing by more than one face, all selected faces must be part of a continuous object. Individual faces can …

Read More »