The following Quick Tour is a step-by-step basic tutorial, which guides you through the main applications of Cimatron E Steps to follow: • Step 1 – Creating the part • Step 2 – Assemble the components • Step 3 – Drafting • Step 4 – Mold project • Step 5 …
Read More »
The version 10 control panel has a Catalog Location utility. The path set here should be where your current catalog parts reside. Cimatron parts will retain a link to the catalog table they were created from. However, this link may not work properly when opening an older job or a job from another site. …
Read More »
Designed to meet the unique challenges faced by die makers today, Cimatron’s die making solution enables you to: Win more jobs and increase profitability with faster, more accurate end professionally looking quotations.Under take any project with the confidence to handle even the most complex parts. Dramatically reduce design time with powerful …
Read More »
The following parameters appear in the Stock, Shank and Holder Tracking Table (the appearance of a parameter in the table is dependent upon the procedure you have selected): Check Against Part up to and including Consider Previous Stock Limit Machining by Shank / Holder Max Holder Dia Considered Min. Stock Width Update Remaining …
Read More »
Within the Stock, Shank & Holder Tracking parameters, you can define whether remaining stock should be considered and also define which part of the tool (the Cutter, Shank and/or Holder) is checked against the part surfaces, and which part is checked against the stock surfaces. Remaining stock is used to control the approach and …
Read More »
Cutter Sequence is one of the Holder Options under Holder Gouge Check: With this option you can open a table in which a sequence of milling cutters can be defined. The cutters must be chosen from the list of defined cutters. Feed and Spin may be defined for each cutter, and all cutters on the sequence list may be …
Read More »
Cutter Sequence is one of the Holder Options under Holder Gouge Check: With this option you can open a table in which a sequence of milling cutters can be defined. The cutters must be chosen from the list of defined cutters. Feed and Spin may be defined for each cutter, and all cutters on the sequence list may be …
Read More »
Cutter Sequence is one of the Holder Options under Holder Gouge Check: With this option you can open a table in which a sequence of milling cutters can be defined. The cutters must be chosen from the list of defined cutters. Feed and Spin may be defined for each cutter, and all cutters on the sequence list may be …
Read More »
Cutter Sequence is one of the Holder Options under Holder Gouge Check: With this option you can open a table in which a sequence of milling cutters can be defined. The cutters must be chosen from the list of defined cutters. Feed and Spin may be defined for each cutter, and all cutters on the sequence list may be …
Read More »
Auto Search is one of the Holder Options under Holder Gouge Check: A replacement cutter is used to machine only the areas gouged by the original cutter holder. The replacement cutter will be taken from the list of defined cutters currently in the file. The replacement cutter is that with the shortest possible clear length and cross section …
Read More »